Very popular item,durable and attractive metal housing for mic & phone jacks,intercom,fuses or switches
etc. Made of aluminum with an attractive powder coat finish. Phone Jack hardware not included. (3) Finishes:
P/N FAP 08-1 black wrinkle
P/NFAP08-2 beige
wrinkle
P/N FAP08-3 plain aluminum.
Dimensions: W=2.9" , L= 2.56" H= 1.06".
HOUSING- BLANK HOUSING NO HOLES. SAME HOUSING AS FAP 08-1 HOUSING. CAN BE
MACHINED TO SUIT SPECIFIC NEEDS.
FAP 08-3A
HOUSING-SURFACE MOUNTED
FOR BOSE STYLE JACK PLUG SINGLE HOLE IN THE CENTER
( hole dim. .562 dia. x .500 across the flats )
P/N FAP-16
Recessed mounted mic & phone jack housing
.
Same part as 08-1 but reworked to allow plugs to enter form the opposite side so they are recessed and out of the way.When
jacks are plugged in they are flush with the surface of the housing a real custom look with this style of housing. Made of
aluminum with a powder coat finish. Comes bagged with clamp, mounting screw.Less jack hardware.
Surface Mounted (4) Aluminim Housing. Less hardware
Dim.3.75WIDE X 5.0LONG X 1.13 HIGH
P/N FAP 08-7 Black powder coat wrinkle
finish.
P/N FAP 08-8 Beige
powder coat wrinkle finish
P/N FAP 08-9 Bare Aluminum (no paint)
Housing 4 Hole Recessed Same housing as FAP 08-6,7,8
but has a special form. With this style of housing jack plugs are out of the way in the recessed housing, a real custom
look. Comes with clamp bar and screws. Same as a 08-4 but has (4) holes.
FAP 10 Black
wrinkle powder coat finish
FAP 11 beige '' ''
'' ''
FAP-12 plain
aluminum no paint
HOUSING- (3) HOLE SURFACE MOUNTED. HAS 3/8 DIA. JACK HOLES. SAME HOUSING AS FAP 08-9 BUT WITH (3)
HOLES.
DIM. 3.75WIDE X 5.0 LONG X 1.13 HIGH
P/N FAP 08-15 BARE ALUMINUM NO
PAINT
UNDER THE DASH- BRACKETS
Mic &
Phone Jack Bracket 90 degree under the dash. Also for switches, fuses etc. . A sturdy and attractive mount, sides are formed to hide wires,
.063 thick heat-treated aluminum. Black wrinkle powder coat finish. Five styles to choose from for most any installation.
Easily installed.
(1) Hole for either Mic or Phone Mounting Bracket
Dimensions- 1.5w x 1.5h x 1.0 deep.
Black wrinkle powder coat finish
P/N FAP 09-1
(2) Hole Mic & Phone Mounting Bracket
Dimensions- 2.3w x 1.5h x 1.0 deep.
black wrinkle powder coat finish
P/N FAP 09-2
Bracket- (4) hole horizontal for either Mic or Phone
Dimensions- 4.5w x 1.5h x 1.0 deep.
P/N FAP 09-3
Bracket- (4) Hole Vertical for Mic & Phone
Dimensions- 2.3w x 2.5h x 1.0 deep.
P/N FAP 09-4
Bracket- for cigerate lighter receptical
Dimensions- 2.5w x 1.5h x 1.0 deep.Has .875 dia. hole
P/N FAP 09-5 color black
INSTRUMENT REDUCER PLATES
REDUCER PLATES ALLOW YOU TO CHANGE OUT DIFFERENT INSTRUMENT AND EITHER REPLACE THEM OR MOVE THEM TO A DIFFERENT PLACE ON
THE PANEL.
Reducers
3 1/8'' dia.
to 2 1/4''dia.
Replace 3 1/8'' dia. instrument with 2 1/4'' dia. Made of .080 thick heat - treated aluminum. Black anodize
finish.
DIM. 3.5 X 3.5
P/N FAP 04-1
AN Gyro to 3 1/8'' dia.
Replace the old AN Gyro with a 3 1/8'' dia. instrument. Dimensions of outer gyro mounting holes is 3.375. Hole dia
.190(8) places. Made of .080 thick heat- treated aluminum. Black anodize finish.
DIM.4.63 X 4.63
P/N FAP 04-2
3ATI Reducers to 3 1/8"
3ATI Reducers make it possible to use a 3ATI hole cut out to mount 3 1/8'' diameter instruments.
One reducer plate bolts to the 3ATI cut out holes behind the panel, the second plate which is the top plate that has the 45
degree corners fits in the old 3ATI cut out and then the 3 1/8'' instrument bolt through
this plate to mount the instrument. Plate can be shimed to instrument panel thickness . Simple installation. Heat-treated
aluminum .080 thick with black anodize finish.BACK PLATE DIM. 3.38 X 3.38
P/N FAP 04-3
3ATI Reducers to 2 1/4"
3ATI Reducers make it possible to use a 3ATI hole cut out to mount 2 1/4''' diameter instruments.
One reducer plate bolts to the 3ATI cut out holes behind the panel, the second plate which is the top plate that has the 45
degree corners fits in the old 3ATI cut out and then the 2 1/4'' instrument bolt through this plate to mount the instrument.Plate
can be shimed to instrument panel thickness, comes with 4 rivets. Simple installation. Heat-treated aluminum .080 thick
with black anodize finish.BACK PLATE 3.8 X 3.8
P/n FAP 04-4
Spacer 3 1/8'' dia. to 2 1/4'' dia
Can be used with reducer P/N FAP 04-1. Fills in the panel thickness, giving a finished look. Made of .080 thick
heat- treated aluminum. Black anodize finish.
P/N FAP-04-5
MOUNTING PLATE
Used to install 2" dia.gauge (oil, amp etc.)which usualy has a clamping bar to hold
gauge in place that would go in the big hole.The 4 small holes are the standard 2 1/4" guage mounting holes.
P/N FAP 04-7
3ATI MOUNTING PLATE
Aluminum plate with the difficult 3 ATI cut out. 1/2" outside boarder
for mounting..080 thick heat treated aluminum. Black anodized finish.
P/N FAP 04-6
COVER PLATES- FOR INSTRUMENT HOLES
COVER PLATE, INSTRUMENT FOR 2 ¼" DIAMETER INSTRUMENT.
PLASTIC -BLACK FIRE RETARDENT MATERIAL
FAR 25.853
P/N FAP 05-1
ALUMINUM -BLACK WRINKLE FINISH P/N FAP 05-1AB
ALUMINUM- NO PAINT P/N FAP 05-1ANP
INSTRUMENT HOLE COVER PLATE 3 1/8 DIA.
P/N FAP 05-2 PLASTIC FIRE RETARDENT FAR 25.853
P/N FAP 05-2AB ALUMINUM (BLACK WRINKLE)
P/N 05-2ANP ALUMINUM (NO PAINT)